Tips

How To The 7 Or Vista sily:
Follow the Below steps as given below-

1)First You Go to Start then select Run

2) Type 'Regedit' and click ok

3) Find 'H_CURRENT_USER\Control Panel\Desktop\'

4) Select 'WaitToKillAppTimeout'

5) Right click and select 'Modify'

6) Change the value to '1000'

7) Click 'OK'

8) Now select 'HungAppTimeout'

9) Right click and select 'Modify'

10) Change the value to '1000'

11) Click 'OK'
How To Install XP in 10 Minutes:
1. Insert The And Finish The Drive Format Step. Now Your Computer Will Restart.
2. Now You Will See The Below Screen.


3. Now Press Shift+F10, It will Open Command Prompt
4. In The Command Prompt Type �taskmgr�
5. Now Click At The Process Tab And Check The Process �Setup�
6. Right Click On �Setup�. Now Click �Set Priority� And Select �Rl Time�.
7. Now Close Task Manager And Command Prompt. Now Your OS installation will be finished within 10 Minutes.
8. Thats All.
How To Hide Any Drive in :
Most of you must have wondered if there exists a way without using software to Hide A Drive completely so that it cannot be viewed or accessed without it. so, here is a siest method to hide drive simple 4 steps.


Follow The Steps For Do This..


1. Goto run type �gpedit.msc� (without quotes)
2. select user configuration �> administrative templates �> components �> explorer(click on it)
3. On right panel srch for hide theses specified drives in my computer.
4. Double click it mark on enable to hide the drive and select drive the which you want to hide. If u wanted to hide all the drives which are on your system then select restrict all drives.
to make it unhidden mark on disable option.

I hope this tips helps u!!
How To Make Computer Faster Using Notepad:
Below are steps that i suggest you should implement to make your pc faster as well as making it safe from thrts


1. First You go to notepad

2. Then write this in mystring=(80000000) without asterisk

3. Now Save it on your desktop and name it ram.vbe. Now You close notepad and double click on ram.vbe nothing will open but your computer will get faster

How to Enable a Remote Desktop Connection in 7:

You can control your computer from a remote loion with 7's integrated Remote Desktop utility. When using Remote Desktop, you see and interact with the remote computer as if you were sitting in front of it. Music and sounds on the remote machine also play locally when connected. By default, Remote Desktop comes disabled. While any version of 7 can connect to a Remote Desktop server, according to , only 7 Professional, Ultimate and Enterprise can act as Remote Desktop servers. If you are using 7 Starter, Home Basic or Home Premium, you cannot host a Remote Desktop session; you may only connect to one

Instructions

Enable Remote Desktop
1_ Click the "Start Menu" button with your mouse or hit the on your board.
2_Right-click on the item labeled "Computer" and then click on "Properties" at the bottom of the list. This brings you to a page with basic information about your computer.
3_Make a note of the "Computer name" under the right column of the basic information page listed under "Computer name, domain, and workgroup settings." You will need this if you want to connect over the local ar network. If you want to connect over the Internet, refer to your router and its manual for your IP address and how to enable port forwarding to this computer for Remote Desktop's port 3389.
4_Click "Remote settings" on the left column of the basic information page. A window apprs with two sections: "Remote Assistance" on the top section and "Remote Desktop" on the bottom section.
5_Choose either the second or the third option, titled "Allow connections from computers running any version of Remote Desktop (less secure)" or "Allow connections only from computers running Remote Desktop with Network Level Authentiion (more secure)," respectively. The decision for more or less security is up to you.

Test the Connection

6_Switch to another 7 computer connected to the network or the Internet.
7_Click the "Start Menu" button with your mouse or hit the on your board.
8_Click "All Programs," then "Accessories" and then choose the program "Remote Desktop Connection." The Remote Desktop Connection client utility will then appr.
9_Type the computer name or IP address from the previous section into the Remote Desktop Connection client.
10_Hit the "Connect" button to connect to the remote computer.How to remove the Winrar-"Plse Purchase...":Click hereThen open up Res, and select ''Open'']



Now select WinRAR.exe

Now press "CTRL+F" and type in: "plse purchase" (without "")



Then click "Srch" and you will find some stuff. Like here:Don't do anything yet! Let me explain how to do it.

Right click on the red squared-text, like this:



Now click "Delete Resource"



Now save the file




If that doesn't work, save the file elsewhere as "WinRAR.exe" and then replace it with the o
Incrse Broadband Speed Using Simple Tw:riginal file.A Simple Twk (XP Pro only) which will incrse your Broadband Speed.

Make sure you Log on as Administrator, not as a user with Administrator privileges.

Follow the steps as given below-

1) Click on Start Button.

2) Select Run From Start Menu.

3) Type gpedit.msc

4) Expand the [Administrative Templates] branch.

5) Then Expand the [Network] branch.
6) Highlight(Select by Single Click) [QoS Packet Scheduler]

7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel)

8) Check(Select By Single Click on it) [Enabled]

9) Change [Bandwidth limit %] to 0 %

10) Click [OK] Button.

11) Restart Your PC.

12) Now Check Your Broadband Speed.