Wednesday, May 25, 2016

Phone


Phone * # 7370925538 # (valet reset) 6230
* # 746025625 # [* # sim0clock #]
* # 92702689 # [* # war0anty #]



* # 7370925538 # (valet reset) 6230
* # 746025625 # [* # sim0clock #]
* # 92702689 # [* # war0anty #]
To access the service menu of the phone by dialing * 3001 # xxxxx #, where xxxxx - security (security ), which defaults to 12345. Thus, to enter will need to dial * 3001 # 12345 # In this mode, for example, you can change the name of the network operator is displayed in the standby mode. To do this, select NAM1, scroll to the sub-Alpha Tag, change it at will (for example, write Vovochka and click OK. Exit is off and on the phone.
It is possible that this works on other (51hh, 61hh).

* # 0000 #, birth date and phone version prog.obespecheniya
* # 06 #, on many imei
* # 92702689 #, then a * bnutoe menu, I do not know why
* # 3370 # and * # 3370 *- on and off the quality of communiion, like that, but not all the operators of this crap is supported. Nr the had v 5.79

service 5120&5125:
Besides from the above there are still a couple SERVICE
1) * # 639 # (* # NEW #) is used to add s ie you can register multiple phone s, and switch between them.

2) * # 92772689 # (* # WARRANTY #)
1) The
2) relse date
3) The date of the reprogramming
4) The date of last repair.
5) Includes data
6) The total talk time.

3) * # 837 # or * # VER # version of the phone (not supported on all models)
4) * # 9999 # or * # 6120 # version softa (not available on all models)

before you change something in the settings
To think well, if you can BACK THEN ALL OF PLACE
Particularly in paragraph 1
Change the name of the operator can not at all models in the latest models, this fture is disabled by the manufacturer.
the only (almost), plus the service * # 3001 # 12345 # This is an opportunity to recover forgotten s to activate the mobile.
And another plus - see the level of the received signal.
2110
Show EMEI * # 06 #>
Show phone software version * # 9999 #> or 2110i * # 170602112302 #> or * # 682371158412125 #>
See the date of manufacture phone * # 3283 #>

3110
Show EMEI * # 06 #>
Shows software version * # 3110 #>
Restores factory settings * # 7780 *>
The entrance to the special menu * # 92702689 #> Commands in a special menu:
6232 OK indies the month and yr
7332 OK indies the last modifiion date in the program
7832 OK indies the date of purchase (if entered)
37832 OK you can enter the date of sale MMYY ('re careful then you can not change)
9268 OK indies the (IMEI)

5110
To reduce electricity consumption can disable EFR (Enhanced Full Rate) # 3370 #>
To activate EFR * 3370 #>
To reduce the rate of battery discharge, and enable HR (Half Rate) * 4720 #> then turn off and back on the phone.
To enable HR # 4720 #>
To disable the SP-encoding (provided that the PIN- enabled device): When you request a PIN-, press "C", then - the up arrow or down arrow. Click the "C" until the display clrs. Then enter the command change PIN-, but do not change it in fact - ** 04 * PIN * PIN * PIN #> The only problem is that this procedure should be repted ch time the apparatus.

6110
To reduce electricity consumption can disable EFR (Enhanced Full Rate) # 3370 #>
To activate EFR * 3370 #>
To reduce the rate of battery discharge, and enable HR (Half Rate) * 4720 #> then turn off and back on the phone.
To enable HR # 4720 #>
To view IMEI * # 06 #>
Show software version * # 0000 #>
The entrance to the special menu * # 92702689 #> Commands in a special menu:
6232 OK indies the month and yr
7332 OK indies the last modifiion date in the program
7832 OK indies the date of purchase (if entered)
37832 OK you can enter the date of sale MMYY ('re careful then you can not change)
9268 OK indies the (IMEI)

7110
View the firmware version * # 0000 #>
View the IMEI * # 06 #>
Log into the service menu: * # 92702689 #> Consistently pressing down you'll see after the IMEI:
An IMEI (International Mobile Equipment Identifiion)
2 MM / YY (date)
3 Date of acquisition (here you can vvesi acquisition date, if your phone is new. Remember that the date is entered once, and if you were wrong date to fix it later it will be impossible!
4 Date of repairs (if repaired)
5 Date of transmission to the user? NOTE: To exit from this mode should be switched off and re-enable the device.
Check the support card mode SIM-clock-stop (only for firmware version 5.24 or later) * # 746025625 #>
Activate Enhanced Full Rate c (EFR): * 3370 #> will be activated after restarting the phone (consumes more power) Off Enhanced Full Rate c (EFR): # 3370 #> and EFR will be disabled when you restart the phone
Activate Half Rate c: (only available for firmware version 4.33 or rlier), enter * 4720 #> and Half Rate Mode will be enabled after restarting the phone Dctivate Half Rate c: enter Enable # 4720 #> and the Half Rate c will be dctivated after a reboot the phone

No comments:

Post a Comment